*********

Welcome to Project 64!

The goal of Project 64 is to preserve Commodore 64 related documents
in electronic text format that might otherwise cease to exist with the
rapid advancement of computer technology and declining interest in 8-
bit computers on the part of the general population.

Extensive efforts were made to preserve the contents of the original
document.  However, certain portions, such as diagrams, program
listings, and indexes may have been either altered or sacrificed due
to the limitations of plain vanilla text.  Diagrams may have been
eliminated where ASCII-art was not feasible.  Program listings may be
missing display codes where substitutions were not possible.  Tables
of contents and indexes may have been changed from page number
references to section number references. Please accept our apologies
for these limitations, alterations, and possible omissions.

Document names are limited to the 8.3 file convention of DOS. The
first characters of the file name are an abbreviation of the original
document name. The version number of the etext follows next. After
that a letter may appear to indicate the particular source of the
document. Finally, the document is given a .TXT extension.

The author(s) of the original document and members of Project 64 make
no representations about the accuracy or suitability of this material
for any purpose.  This etext is provided "as-is".  Please refer to the
warantee of the original document, if any, that may included in this
etext.  No other warantees, express or implied, are made to you as to
the etext or any medium it may be on.  Neither the author(s) nor the
members of Project 64 will assume liability for damages either from
the direct or indirect use of this etext or from the distribution of
or modification to this etext. Therefore if you read this document or
use the information herein you do so at your own risk.

*********

The Project 64 etext of the ~Security Alert manual w/o codes~,
converted to etext by Dohi <dohi@chello.hu>.

SECAL10.TXT, August 1998, etext #395#

*********

SECURITY ALERT(tm)

User's Manual

COMMODORE 64


PUBLISHED BY: FIRST STAR SOFTWARE, INC.

EXCLUSIVELY DISTRIBUTED IN NORTH AMERICA BY: INTRACORP, INC.

PROGRAM COPYRIGHT 1990 BY FIRST STAR SOFTWARE, INC. ALL RIGHTS
RESERVED.  MANUAL AND PACKAGING DESIGN COPYRIGHT 1990 BY INTRACORP,
INC. ALL RIGHTS RESERVED.

THE INFORMATION IN THIS MANUAL IS SUBJECT TO CHANGE WITHOUT NOTICE AND
DOES NOT REPRESENT A COMMITMENT FROM FIRST STAR SOFTWARE, INC. OR
INTRACORP, INC. PLEASE NOTE THAT THE SOFTWARE DESCRIBED IN THIS
DOCUMENT IS SUPPLIED UNDER A LICENSE AGREEMENT. NO PART OF THIS
DOCUMENT MAY BE REPRODUCED IN ANY FORM, IN WHOLE OR IN PART, WITHOUT
PERMISSION IN WRITING FROM THE PUBLlSHER.


INTRODUCTION

Have you ever wanted to live the exciting life of a master spy?
Finally, you can experience the thrill on your computer.

SECURITY ALERT is a fully animated strategy adventure game. You will
have the opportunity to penetrate the defenses of a bank, a research
institute, a jewelry store, a museum, and even a foreign embassy.
Using multiple perspective graphics with both top and side view, you
will have to find your way through more than 1400 rooms.

You will face some of the most advanced security defenses in the
world, hidden cameras and microphones, infrared beams, motion and heat
detectors, weight sensitive floors and much more. Don't worry, you are
equipped with some high-tech gadgets of your own.

Any master thief knows that he must prepare for his missions. So,
before you dive into the game, spend some time reviewing the
information in this manual.

GOOD LUCK!


GETTING STARTED


Requirements
------------

In order to run SECURITY ALERT you will need the following equipment:

- A Commodore 64, 64C, SX64, 128, 128D(the latter two in C-64 mode)
  computer.

- A 1541, 1571 or compatible 5 1/4" dish drive set up as unit 8, drive 0.

- A joystick plugged into Control Port 2.

- A color monitor or TV set is preferable.

NOTE: Please be sure you have the computer properly hooked up and are
familiar with its operation. If there are questions about the
computer, please refer to your owner's manual.


Loading
-------

Switch on the computer. If you are using a Commodore 128, switch it
into C-64 mode by pressing the C = key while turning on the computer
or by typing the command GO64 and pressing the RETURN key. Insert the
SECURITY ALERT diskette into the disk drive (unit 8). Type LOAD"*",8,1
and press the RETURN key. The program will then load and run.


Entering the single character code
----------------------------------

As a method of copy protection, a single character code must be typed
in each time the game is run. You will be asked to type a character
from a specified row and column. Find this on the code card included
with the program. Type the single character and the program will
continue. If you mistype, you will be told to try again. If you
mistype three times, the computer will lock up.

After you enter the single character code, you will be prompted to
flip the disk. After turning the disk over, re-insert it into the
drive and press the FIRE button. The program will the load the
assignment selection screen.


OPERATION


Assignment Selection Screen
---------------------------

[Picture omitted]

Move the character on his motorcycle to the bottom of the screen.
Highlight the difficulty level of your choice (i.e. NOVlCE,
INTERMEDIATE, EXPERT) by driving over it.

Next, move the character onto any of the five buildings. The buildings
are more difficult as you progress from the Jewelry Store (easiest) to
the Embassy (most difficult). You will note the lights in the building
turn on. Press the FIRE button to begin the game.


Main game screen
----------------

[Picture omitted]

About the main screen

The main game screen has six major components: Main Window, Close-Up
Window, Memo Pad, Alarm Status and View Buttons, Tool Boxes and Map
Display (see Playing the game for more details on using each section).

The Main Window is where all of the movements of your character take
place. When this window is active, you can move (walk, jump or crawl)
your character around the building and up to objects for closer
inspection or manipulation. The Close-Up Window is where you
manipulate an object (like the safe in the above illustration). The
Tool Boxes hold all of the tools and objects that you might need. The
Map Display (see Map Display section) helps you keep track of where
you and the guards are in the building. You can change the perspective
(top or side view) as well as the direction of the view in the Main
Window by using the View Buttons or the designated keys on the
keyboard. The Memo Pad keeps track of the game time, your coordinates,
and any clues you find along the way.


Playing the game
----------------

Commands

Listed below are the commands and action sequences that you can use in
SECURITY ALERT.

NOTE: When you want to single-click, press the FIRE button once. To
double-click, press the FIRE button twice in quick succession.

Walk - move the joystick in the desired direction.

Crawl - press FIRE button and pull joystick down. Once on the tloor,
move the character as in walking.

Stand up - form the crawling position, press the FIRE button and push
joystick up.

Jump - press FIRE button and push joystick up, then move the character
as in walking. You must be standing before you can jump.

Stop jumping - press FIRE button and pull joystick down, then
character will walk.

Open unlocked doors, safes, etc. - walk to the object, then press the
FIRE button. After the object appears in the Close-Up Window, touch
with hand cursor and press FIRE button once. If locked, use key, card
or tool to unlock.

Use a tool or key in the Close-Up Window - use hand cursor to select
object from tool box, single-click and drag the item into the Close-Up
Window. When tool is positioned, press FIRE button once.

Take/pick-up objects out of sates, etc. - select with hand cursor and
double-click FIRE button. Next, drag to the Tool Box and single-click
to drop the object into the Tool Box, or drag the object up into the
Main Window. The object will automatically appear in a Tool Box and
start to flash. This object will automatically be used at the
appropriate time.  For example, doors can be unlocked without using
the Close-Up Window by walking up the door while "carrying" the
correct key.

View contents of a safe - Press FIRE button once as each object
appears, to see next item.

Use a tool or key in Main Window - use hand cursor to select item from
tool box and drag towards the Main Window. The icon will flash in the
tool box indicating character is "using/carrying" the item in the Main
Window.

Access the hand cursor when in the Main Window - to use the hand
cursor at any time while in the Main Window, double-click the FIRE
button. The hand cursor will appear over the T View Button.

Toggle between top and side vlews - press the V key or select the T
with the hand cursor on screen.

Rotate top or side view 90 degrees left - press the J key or select
the < with the hand cursor on screen.

Rotate top or side view 90 degrees right - press the K key or select
the > with the hand cursor on screen.

Rotate top or side view 180 degrees - press the M key or select the V
with the hand cursor on screen.

Pause - press the space bar. 3 options are presented:

   1. Abort - end the game and return to assignment selection
      screen.

   2. Replay - end the game and start a new game in the same
      building and level of difficulty.

   3. Resume - continue playing the current game.

   Press the corresponding numeric key.


Summary of Game Elements
------------------------

The object of SECURITY ALERT is to break into one of the game's five
types of high security buildings, avoid or disarm the detection
devices, locate the "treasure" object and find the escape key (large
gold key).  With the treasure and gold key in your position you must
escape within the limited time. All without being caught by the roving
robot guards.

The five buildings include a JEWELRY STORE, MUSEUM, BANK, RESEARCH
INSTITUTE and a FOREIGN EMBASSY. A given building can have more than
one floor and there are a few different floor plans for each of the
five buildings.


Detection devices

Listed below are all of the detection devices that are present in the
buildings, although not all of the devices are in any one building.
Also listed with each device is the tool(s) or actions that you will
need in order to disable, destroy or bypass the device without
sounding an alarm.  Detection devices can often be tampered with and
destroyed. However, an alarm will be sounded. In other cases,
tampering with a detection device may sound an alarm and the detection
device will remain intact.

Camera - Defeating tool: mirror

   The player must crawl beneath the camera by approaching from a
   direction perpendicular to the direction the camera is facing.
   For example, if a camera is located on a North wall facing
   South, the player must crawl towards the camera from the East or
   West. Once under the camera, the mirror can be attached.

Heat detector - Defeating tool: spray can (only works for the given
   room and only lasts while you stay in that room).

Sound detector (microphone) - Defeating action: crawling

Motion detector - Defeating action: walk or crawl very slowly

Horizontal or Vertical beams (infrared beams) - Defeat invisibility
   tool:  goggles

Weight detector (pressure sensitive floors) - Defeating action:
jumping on safe visible floor tiles while avoiding detection tiles.

Darkness (lights off) - Defeating tool: Flashlight.


Containers

Containers may contain controls or any number of tools. They can be
opened and closed, but they can never be destroyed. The controls or
locks on the containers can be destroyed. Containers may have weight
sensors that are not displayed. (see Tools: Book).

Control container - contains only a device control.

Wall safe - can contain any tool, treasure or memo.


Controls

Controls turn detection devices ON or OFF. They also control the
tamper-sensing alarms on the detection devices. One control can
control up to three devices (detectors or electronic locks) at the
same time.  Controls are always located in a Control Box. The hand
cursor is the only tool that successfully operates a control, with the
exception of circuit boards. The circuit board is manipulated in the
Close-Up Window only (see Figure 10 regarding use of alligator clips
and wire cutters).

Push button - there is no visual indication of the ON or OFF position.
However, you may see the ON/OFF light or the controlled device.

Switch - has the ON and OFF positions clearly marked.

Keypads - used to turn OFF a device or open doors. It requires a two
digit code and use of the entry key.

Elevator control - the only control that doesn't control any device.
It simply moves the elevator one floor up.

Circuit board - located in control boxes, circuit boards have 3 wires.
You can cut all or any of the 3 wires and jump two of them. This
produces 24 possible combinations (see Figure 10).

Cutting tool: wire cutters
Jumping tool: alligator clips


Locks

Locks are found in doors and on containers. They can be opened
automatically in the Main Window if the proper key is the currently
selected tool (flashing in the Tool Box while the player is active in
the Main Window). Otherwise they can be manipulated in the Close-Up
Window

Key lock - there are 4 color coded types of key locks: Red, Green,
Blue and Yellow. The building's design assigns certain colors to
special places. To open a color coded lock, the player needs to use a
key of the same color.

Card key lock - these locks are opened using magnetic cards which are
also color coded.

NOTE: For both key and card locks, there may be more than one key/card
of the same color, so you must keep track of which is which.

Electronic lock - electronic locks can be operated by any of the
control devices.


Tools

Tools are found in containers. They are used to manipulate detectors,
controls and/or locks.

When you find a tool, you can store it in an empty tool window, or it
can be swapped for one previously stored. You can also drop the tool
back into a container. You can carry a maxmum of 6 tools, and can
select only one a time. A selected tool acts automatically in the Main
Window or manually in the Close-Up Window.

Memo - memos contain hints, like the location of controls, code
numbers for keypads, etc. If a player finds and takes a memo, it will
be stored automatically in the Memo Pad. The player can read anything
in his Memo Pad at anytime during the game by selecting the hand
cursor and single-clicking in the Memo Pad.

Money - the main purpose of money is to add points to your score. The
amount of money you have is displayed in the Memo pad.

Compass - when found and stored in the tool window, the coordinates of
your location will be displayed in the Memo pad (see sample floor plan
enclosed). F1 indicates first floor. Letters represent the player's
position, left or right. Numbers represent the player's position, up
or down.

Alliga or clip wire - these are used to "jump" wires in circuit
boards.  You can select the two wires you wish to "jump" before you
cut them. You can return and pick up alligator clip wires at any time
after using them.

Wire cutters - these are used to cut wires in the circuit boards. The
wire will remain cut for the remainder of the game.

Hammer - used most commonly to destroy a device, control or lock.

Drill - use when all else fails.

Screwdriver - don't leave home without it.

Goggles - when selected as the current tool, any active and invisible
infrared beams will become visible.

Spray can - this tool can cool off a room to defeat a heat detector.
In order to avoid detection, you must spray the can in the Close-Up
Window after you have entered an area monitored by a Heat Detector,
but before entering the range of the Heat Detector. (NOTE: the spray
can cannot be "carried" and used automaticatly.)

Flashlight - when selected in a dark room, it turns on the lights in
that room, as displayed in the main window.

Book - used in containers with weight sensitive devices. If an object
is taken, it must be swapped with the book or an alarm may be
triggered.

Mirror - These can be attached to fool cameras (see Camera under
detection devices).

Walkie Talkie - used to lead guards away from your location. By using
a Walkie Talkie in the Close-Up Window, you transmit a signal to the
other Walkie Talkie located somewhere in the building. The guards will
hear the receiving Walkie Talkie and travel towards it. Note: You can
move the Walkie Talkies to any SAFE you desire and signal to it later.

Electronic decoder - when used on a keypad, it will display a
combination in the memo pad. These numbers are not necessarily
correct.

Keys - open key locks and are color coded with the color of the lock.
However, every lock has an assigned key (i.e. not every red key opens
every red lock).

Key card - same as keys.

Dynamite - found in containers, it is used to blow holes in walls.

Time bomb - these can be dropped in a given location. If the guard or
player passes through the "booby-trapped" area within the required
time, the bomb will explode and kill either the guard or player.

Gas grenade - works like the time bomb, but doesn't kill the guard. It
will immobilize either the player or the guards if they step into the
room where the grenade is located.


Treasures

Treasures are the objects that you are searching for. They correspond
to the different buildings as follows:

Jewels - jewelry store.

King Tut - museum.

Gold - bank.

Secret formula - research institute.

War plans - foreign embassy.


Alert levels

The colored bar above the view buttons is the Alert Level Indicator.
There are four possible levels of alert: Green, Yellow, Red and White.
Green is normal and White is maximum alert. As your character tampers
with devices or is detected by any detection devices, the alert level
rises. The alert level will gradually return to Green if your
character manages to avoid detection.

If you are detected by a device such as a camera or microphone, move
out of range or stop making noise (crawl) as soon as possible. The
longer you remain under detection, the higher the level of alert.


Guards

Guards never stop. They move constantly and their behavior follows the
following rules based on the different alert levels:

Speed - guards move at 4 different speeds according to the alert level
as reflected by the color of the alert level indicator. The default
speeds are equal to 1/2, 3/4, 1 or 1 + 1/4 times the speed of your
character.

Doors - based on the different levels of alert, the guards:

   a) do not open any doors
   b) open and close unlocked doors
   c) open locked doors and close them, leaving them unlocked
   d) open any door and close and lock them behind them.

Line of vision - based on the alert level, the guards see the intruder
at a certain range. The higher the alert level, the greater the range
of the guards vision. They can not see through closed doors or walls,
but they can see through open doors.

Modes - the guards patrol in one of the following modes:

   a) random patrol
   b) responding to alarms
   c) chasing the player


Game play
---------

Moving your character

The character can be moved in any of 8 possible directions, and in any
of three different modes: walking, jumping or crawling. Moving the
joystick in any direction will move the player in that direction,
without changing the mode.


Opening and closing doors

Position your character in front of the door and press the FIRE button
once. Whether the door opens or not depends on the currently selected
tool (see Tools). Failure to open a door or to lock it after closing
it will always bring up the Close-Up Window automatically (see
Close-Up Window below) to allow you to select the proper tool. The
examples below show the effects on a door for different types of
tools:

Correct tool: always opens or closes any door. Also, it locls the door
after closing, if there is a lock.

Succesful tampering tool: same as above, but if lock is
tamper-sensored the alarm will go off.

Unsuccessful tampering tool: always closes a door, but fails to lock
it.  Success in opening the door depends on the status of the lock: if
unlocked or broken, it will open, if locked, it won't. The close up
window will show the lock if the lock fails to lock or unlock. In all
cases, the alarm will go off if the lock is tamper-sensored.

Destruction tool: always succeeds in opening or closing a door, but
lock will be destroyed and alarm will go off.

Any other tool: always opens or closes a door unless it is locked.
Never locks the door after closing it. The lock will appear in the
Close-Up Window if it fails to lock/unlock.


Examine container

Position your character facing the container and in close proximity.
Press the FIRE button once. Control will pass to the Close-Up Window.
How the object is displayed in the close up window depends on the type
of tool being used. If the container opens, it will be displayed in
the open position and any object inside the container will be shown
automatically.  If the container fails to open, it will be shown as
closed. At this point you will have to defeat the lock if you want to
open the container.


Examine detector

Position your character facing the detector and in close proximity.
Press the FIRE button once. Control will pass to the Close-Up Window.
Rules concerning the currently selected tool will apply. You can
disable or destroy the detector, but alarms may go off.


Examine any object in a room

Position your character outside the range of any object, but facing
the object. Press the FIRE button once. The currently selected tool
does not act upon the object because you are out of the immediate
range of the object. Control passes to the Close-Up Window and the
current tool will be enabled. The four possible situations follow:

   a) lf there is no object to be examined, nothing will be shown, but
   you can use or select tools.

   b) If there is a detector, it will be displayed showing its status
   (on or off).

   c) If there is a container with a closed lock, it will be displayed.
   If there is no lock or it is broken or unlocked, the open container
   will be displayed along with access to all of the objects inside of
   it.

   d) If there is a door (opened or closed) with a lock (locked or
   unlocked), the lock will be shown. lf there is no lock, or the lock
   is broken, nothing will be shown.


Change building display

Either use the V key or position your character away from any object
and press the FIRE button twice. The hand cursor will be displayed
over the view buttons. See view buttons below. Note: you can next move
the hand over to the Close-Up Window if you want.


Re-enter Main Window

Dragging the hand cursor or any tool into the Main Window will
automatically close the Close-Up Window and activate the Main Window.


Close-Up Window

Whenever control is not in the main window, a cursor is displayed. The
cursor usually represents the currently selected tool. However, if
there is no tool selected or the cursor is outside the Close-Up or
Tool Windows the cursor will be a hand.


Select a tool

Tools can be picked up, druppcd, swapped or seanned in the tool boxes
or in open containers. When exiting the Close-Up Window, the last tool
selecled will be dropped automatically into the tool box. The tool
that was dropped will become the currently selecled tool in the Main
Window and will flash in the tool box.

In tool boxes

   a) if the current tool is the hand, point at the desired tool and
   press the FIRE button once.

   b) if the current tool is not the hand, point at any emply box and
   press the FIRE button once to drop tool. To select a different tool,
   point at desired tool and press the FIRE button again.

In open containers

   a) if the current tool is the band, each click will display another
   tool, memo or money from the container. Double-click to pick up the
   desired tool, memo or money that is displayed.

   b) if the current tool is a book, press the FIRE button to swap the
   book for the desired tool.

   c) if the current tool is any other tool, press the FIRE button once
   to drop the current tool if the container has room. Press the FIRE
   button once to swap the tools if the container is not empty.
   Double-click to drop the tool if the container is not empty.


Using tools

To use a tool on an object, place the tool over the object.

   a) If the object is an open container, see Select a tool above.

   b) If the object is a closed container, press the FIRE button once to
   show the lock.

   c) If object is a lock, select the proper tool to unlock the lock and
   press the FIRE button. If successful, the container will be shown
   open along with any objects inside. If unsuccessful, depending on
   tool used, lock may be broken, alarm may sound or nothing will
   happen.

   d) If object is a control or detector, select the proper tool to
   manipulate the device and press the FIRE button. Result will depend
   on the type of tool used.

   e) If there are no objects in the Close-Up Window, you may drop
   special tools in the room (i.e. bombs, etc.).


Exit Close-Up Window

To return control to the Main Window, move hand cursor to the Main
Window.


View Buttons

To access the view buttons, double-click in the Main Window away from
any object and the hand cursor will appear by the T in the View
Buttons Window.

The View Buttons can also be accessed from the Close-Up Window by
simply moving the current tool over to the View Buttons Window. In
this case, the cursor will be converted to a hand as soon as it leaves
the Close-Up Window.

Toggle top/side views: place the hand cursor on the center T button
and press the FIRE button or press the V key on the keyboard. The Main
Window display will change from the top view to the side view and vise
versa.

Buildings orientation: place the hand cursor on eithcr the right or
left arrow buttons and press the FIRE button or use the J or K kcys on
the keyboard. The building display will rotate 90 degrees in the
direction indicated. By changing the view, you can examine any wall in
a room in either a side or top view display.


Memo Pad Window

The Memo Pad/portfolio Window is one of the locations you can access
with the hand cursor. Clicking on the memo pad "leafs" through the
materials in your portfolio (any clues, numbers, codes, etc.), game
stalus and your score.

[Picture omitted]

Map Display

The map display will give you an overview of the current building's
floorplan. It will also show you which direction you are facing, the
position of the guards, your location and whether doors are open or
closed.

NOTE: In the "TOP" view, this indicates the direction to the top of
the screen. In the "SIDE" view, it indicates the player's view
forward. The view indicated by the compass direction represents the
player's point of view. It may NOT be the same direction that the
character on screen is facing. The player (you) may be looking at the
North wall, which contains the safe, while the character on screen may
be facing South. That is why you can see his face (if you are using
the side view) or he will be facing South in the top view. If you
press "M" on the keyboard, the view will change. The "S" will appear
at the top of the Map Display and if you are using the side view, the
safe will have disappeared and you will be looking down the hall to
the South. If you were in the top view, the safe can now be seen, but
on the wall below the character. As before, his face will be facing
South, so he is facing up, to the top of the screen.


Play Example #1
---------------

[Figures omitted]

This section takes you step-by-step through opening a safe and
removing its contents. Although this is a specific example, many of
the technigues are used throughout SECURITY ALERT.

Figure #1: In this example, which is the NOVICE level of the JEWELRY
STORE, you will start in the North East corner of the building. These
are compass cooridnates E 1. Walk FORWARD (North) to the SAFE.

Figure #2: Press the FIRE button ONCE upon reaching the SAFE. The SAFE
will automatically appear in the Close-Up Window. Note that the HAND
CURSOR also appears just outside the Close-Up Window, partially in the
lower left TOOL BOX containing the BLUE KEY.

Figure #3-A: Use the JOYSTICK to move the HAND CURSOR on to the SAFE
in the Close-Up Window. When the HAND CURSOR is touching the SAFE,
press the FIRE button ONCE.

Figure #3-B: The SAFE will open and the INTERIOR LOCK will appear.

Figure #4-A: Use the JOYSTICK to move the HAND CURSOR back to the TOOL
BOXES. Press the FIRE button once to pick up the BLUE KEY.

Figure #4-B: The HAND CURSOR will disappear and the BLUE KEY will now
respond to movement of the JOYSTICK Drag the BLUE KEY back into the
Close-Up Window.

Figure #5-A: Position the BLUE KEY at the opening of the LOCK When it
is properly positioned, press the FIRE button ONCE.

Figure #5-B: The SAFE will open and the icon for the first MEMO will
appear in the SAFE. Note, that at this time the BLUE KEY is acting as
your cursor.

Figure #6: In order to read the MEMO and search the contents of the
SAFE, return the BLUE KEY to the TOOL BOX. To do this, drag the BLUE
KEY back to the TOOL BOXES (select an EMPTY tool box); then, with the
BLUE KEY centered in the TOOL BOX, press the FIRE button ONCE. The KEY
will drop into the selected TOOL BOX and the HAND CURSOR will appear.

Figure #7: Move the HAND CURSOR back into the Close-Up Window and
position it over the icon of the MEMO. You now have two options:

a) you can view the contents of the SAFE, without taking anything, by
keeping the HAND CURSOR positioned in the center of the SAFE. As each
item appears (in this case there will only be the MEMO and the stact
of MONEY) press the FIRE button ONCE as each item appears to see the
next item.

b) You can read the MEMO by DOUBLE-CLICKING (pressing the FIRE button
twice very quickly). You will see and hear the MEMO being typed in the
MEMO PAD in the top, right corner of your screen. The message reads
"WARNING CAMERAS ARE ON".

Figure #8-A: After the MEMO has been written, the next object (the
stack of MONEY) will appear in the SAFE in the Close-Up Window. The
MONEY can be collected by again DOUBLE-CLICKING while keeping the HAND
CURSOR positioned in the center of the SAFE.

Figure #8-B: As the MONEY is collected, you will receive credit in the
MEMO PAD and the SAFE will empty. (MONEY collected during the game
contributes to your overall score.)

Figure #9: Since there is nothing left to collect in the SAFE, it is
time to return to the action, back to the Main Window.

REMEMBER: GUARDS KEEP PATROLLING AND THE TIME KEEPS RUNNING OUT WHEN
YOU ARE WORKING IN THE CLOSE-UP WINDOW!

To activate the on screen character, move the HAND CURSOR up, towards
the bottom of the Main Window. Automatically, as soon as the HAND
CURSOR enters the Main Window, the following will all happen at the
same time:

a) The SAFE will close in the Close-Up Window
b) The HAND CURSOR will disappear
c) The SAFE will close in the Main Window
d) The Close-Up Window will become empty (turn black)
e) The on screen character will respond to the JOYSTICK


Play Example #2
---------------

This section takes you step-by-step through opening a control
container and bypassing a CIRCUIT BOARD. Although this is a specifc
example, many of the technigues are used throughout SECURITY ALERT.

In this example, which is the NOVICE level of the RESEARCH LAB, you
will have to have found and used the DYNAMITE to get far enough into
this level to find the ALLIGATOR CLIPS located in the safe at
coordinates G/02. ALLIGATOR CLIPS are used to jump wires BEFORE
cutting them, this keeping the circuit closed. You will also need the
WIRE CUTTERS located in the safe at coordinates C/08. WIRECUTTERS are
used to cut the wires AFTER you have "jumped" your selected wire
combination using the ALLIGATOR CLIPS.

Figure #10-A: Having first placed the ALLIGATOR CLIPS and WIRE CUTTERS
in your Tool Boxes, travel to the CONTROL CONTAINER located at
coordinates A/06. Walk up to it and press the FlRE button ONCE. The
GREEN PANEL will appear in the Close-Up Window. Move the HAND CURSOR
on to the GREEN PANEL and press the FIRE button ONCE. Since the panel
is locked, use the YELLOW MAGNETIC CARD to open the panel. When the
panel opens, the CONTAINER will seem to be empty.

Return the YELLOW CARD to the Tool Box. Now, with the HAND CURSOR
positioned in the center of the opened CONTAINER, press the FIRE
button ONCE again.

When searching control containers, always check inside what appears to
be an empty container. Blade Switches; Push Buttons; Keypad Locks;
Ciruit Boards; etc. are located in these containers.

Figure #10-B: You will see three wires on the CIRCUIT BOARD. The
question now is, which wire or wires, if cut, will sound the ALARM?
Also, what DETECTION DEVICE(S) OR LOCK(S) are controlled by this
panel?

Figure #10-C: Move the HAND CURSOR over into the Tool Box and pick up
the ALLIGATOR CLIPS. (Press FIRE button ONCE.)

Figure #10-D: To jump the wires number 2 and 3, proceed as follows:

a) Drag the ALLIGATOR CLIPS from the Tool Box into the Close-Up
Window.

b) Place the TOP ALLIGATOR CLIP exactly onto the base of the contact
for the middle wire (wire #2). Line up the dark spot in the top clip
with the center of the base of wire #2. Once correctly positioned,
press the FIRE button ONCE.

Figure #10-E: Now, to connect the other end of the jumper cable to
wire #3, again drag the TOP ALLIGATOR CLIP exactly onto the base of
the contact for the wire on the right (wire #3). Line up the dark spot
in the top clip with the center of the base of wire #3. Once correctly
positioned, press the FIRE button ONCE.

Figure #10-F: If everything has been done properly, the instant you
press the FlRE button as instructed in 10-E above, the JUMPER CABLE
will appear bridging BOTH wires #2 and #3. You are now ready to start
cutting the wires. (You may return to the ALLIGATOR CLIPS later in a
game to use them again if needed...but wait to cut the wires BEFORE
removing them.)

Figure #10-G: Move the HAND CURSOR back to the Tool Box and pick up
the WIRE CUTTERS by centering the HAND CURSOR in the appropriate Tool
Box and pressing the FIRE button ONCE.

Figure #10-H: Drag the WIRE CUTTERS into the Close-Up Window and
position them in the center of the selected wire, which in this
example is the middle wire (wire #2). Once properly positioned, press
the FIRE button ONCE. You will see and hear wire #2 being cut.

Figure #10-I: Drag the WIRE CUTTERS to the right and position them in
the center of the third wire (wire #3). Once properly positioned,
press the FIRE button ONCE. You will see and hear wire #3 being cut
and if the proper wires were jumped you will NOT trigger the ALARM!

Figure #10-J: Return the WIRE CUTTER to the Tool Box. Then, move the
HAND CURSOR back up into the Main Window.

Figure #10-K: The GREEN CONTROL PANEL cove will close and the action
will start back up in the Main Window.


Game Play Hints

1. Upon entering a room, close the door behind you. This way, guards
on routine patrol will walk by you. In high stages of alert, you will
need to lock the door to keep the guard(s) out.

2. To move faster about a building, "carry" a key with you. You will
open locked doors just by walking up to them. (You will NOT have to
manipulate the key into the lock in the Close-Up Window). In the
easier levels, the key you start with is used most often in that
building. You are carrying whichever item is flashing in the Tool
Boxes while you are working in the Main Window.

3. In buildings with infrared beams, "carry" the goggles to detect
beams and check the side and top views alternately. Vertical beams
need to be walked around (Top View = Left or Right). The Horizontal
beams need to be crawled under or jumped over (Side View = Crawl or
Jump).


Additional Information
----------------------

Backups
-------

Backup copies of the Security Alert disk is available directly from
IntraCorp. The $6 charge for the disk can be paid by check, American
Express (sorry, we cannot accept Visa or MasterCard phone orders), or
COD. To order, write to IntraCorp, Inc., 14160 S.W. 139 Ct., Miami, FL
33186 or call 1-800-INTRACO [(800) 468-7226)] between 10 a.m. and 5
p.m.  Eastern time (Monday through Friday).


Technical Support
-----------------

Registered owners of this software product are entitled to technical
support from our Customer Service department. If you have any problems
or questions, please call Customer Service at (305) 252-9040 between
10 a.m.  and 5 p.m. Eastern time (Monday through Friday). Please note
that the warranty card that came with this product must be mailed to
IntraCorp before any assistance can be given. Please allow sufficient
time for the card to arrive before calling Customer Service.


Credits
-------

Security Alert is sold under licensc to the user. Please see the
licensing agreement included with the package for details of the
license.

Programmed by MIKE LIVESAY.

Music by DAVID SCHROEDER.

Commodore 64, 64C, SX64, 128, 128D, 1571, 1541 are trademarks of
Commodore Business Machines, Inc.

Program Copyright 1990 First Star Software, Inc.

Manual and Packaging design Copyright 1990 Intracorp, Inc.

For more information on other IntraCorp, Inc. products, please call
your computer dealer or call 1-800-INTRACO.


CODE CARD

[Code Card omitted. Hope no one needs it ;-)]

*********
